Category
Filter
- Product type
- Locking set (3)
- Seal (3)
- Corner guide (2)
- Electromechanical push lock ePush Lock (2)
- Filler (1)
- 3D unit connectors (1)
- Emergency hammer (1)
- Emergency opening (3)
- Hinge (26)
- Keys (1)
- Swinghandle, Lifthandle (12)
- Other latch (8)
- Rod guide (1)
- Locking point (3)
- Quarter turn (9)
- Cam (1)
- Material of the module
- Zinc die (26)
- Polyamide GF (12)
- Polyamide black and zinc die (9)
- Steel and Polyamide GF halogen-free and flame-retardant (1)
- Stainless steel AISI 304 (1)
- Stainless steel AISI 316 (9)
- Stainless steel AISI 316L (2)
- Aluminium (11)
- Surface of the module
- chrome-plated (5)
- zinc-plated (1)
- black (12)
- black powder-coated (15)
- black powder-coated for outdoor use (3)
- black powder-coated and zinc-plated (3)
- raw (3)
- polished (3)
- bright polished (3)
- anthracite anodized (3)
- electropolished (1)
- pickled and passivated (1)
- grey powder-coated RAL 7038 (5)
- red (1)
- signal black powder-coated (2)
- Surface
- black (1)
- blue (3)
- sky blue (1)
- Standards
- ⓘ An article of the same design was tested (5)
- DIN EN 1672-2 (hygiene) (2)
- DIN EN 14159 (hygiene) (2)
- According to DGUV directives (2)
- EHEDG Certification (2)
- DIN EN 61373 (shock and vibration testing) (14)
- DIN EN 1630 class RC2 / WK2 (resistivity) (5)
- DIN EN 50102 - IK10 (shock resistance) (5)
- DIN EN 45545-3 class E20 (fire protection) (5)
- DIN EN 45545-3 class E60 (fire protection) (2)
- DIN EN 45545-2 HL3 (fire protection) (1)
- Protection class IP 65 (18)
- Protection class IP 66 (3)
- Protection class IP 69K (2)
- Program
- 1000 (9)
- 1004 (1)
- 1011 (2)
- 1056 (25)
- 1079 (1)
- 1091 (7)
- 1110 (1)
- 1121 (6)
- 1130 (5)
- 1225 (4)
- 1317 (5)
- 2225 (6)
- 3000 (2)
- 5225 (1)
- Cut outs
- Dimension GH, length of housing
- 18.0 mm (3)
- 31.0 mm (6)
- 32.0 mm (1)
- 42.0 mm (2)
- Insert type
- Double bit 3 (2)
- Double bit 5 (2)
- Hygiene triangular 8 (1)
- Hygiene square 8 (1)
- Hexagon female SW 4 (2)
- Tube with marking (1)
- Square 8 (1)
- Square 8 with marking (2)
- Square 9 with marking and outer rack, railway version (1)
- Mounting position
- Inside the sealing (30)
- Outside the sealing (8)
- Recommended for door thickness from
- 1.0 mm (5)
- 1.2 mm (3)
- 1.5 mm (13)
- 2.0 mm (1)
- Recommended for door thickness up to
- 2.0 mm (5)
- 4.0 mm (3)
- 6.0 mm (3)
- 8.0 mm (3)
- 12.0 mm (1)
- 15.0 mm (1)
- 20.0 mm (6)
- Locking component
- Rod control (4)
- Cam (24)
- Roller Cam (2)
- Cabinet type
- Single cabinets (36)
- In-line cabinets with single door (37)
- In-line cabinets with double door (29)
- Door position
- prominent (1)
- concealed (33)
- Door version
- Right (56)
- Left (58)
- Lift-off version
- without tools (4)
- without tools, from 90° opening angle (1)
- Seal type
- Clip-on profile (2)
- Clamping profile with filler (2)
- Housing head size
- 30 x 10 mm (1)
- 32 x 6 mm (5)
- 40 x 9,8 mm (1)
- Locking set
- Profile half cylinder A = 30 (3)
- Profile half cylinder A = 35 (2)
- Round cylinder (9)
- Insert (13)
- KABA type 1514 (2)
- Push button (4)
- iLOQ No. D50S.511.SD (recommended) or D50S.111.SD (1)
- Locking type
- Chest habdle with snap-in function (4)
- Latch-Hinge (7)
- Mounting type on the frame
- screw-on from outside (29)
- screw-on from outside, for countersunk screw small head M6 (1)
- Mounting type on the door
- screw-on from outside (29)
- screw-on from inside (5)
- Round cylinder type
- EMKA EK, keyed EK 333 (4)
- EMKA EK, differently keyed (3)
- Key system 9081 (2)
Our Topseller:
Swinghandle "short" with RC2 for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U158-BOfor cam
New Products
-
-
-
-
-
-
-
-
-
Locking set for profile half cylinder 40, Zinc die black powder-coated for outdoor use; 2225-U11-01 for A = 30 mm, for short version
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Corner guide outside the sealing, Polyamide black and zinc die; 1121-U206 for multiple interlocking
-
Corner guide inside the sealing, Polyamide black and zinc die; 1121-U205 for multiple interlocking with compression function
-
Locking point with compression function for multiple interlocking, left version, Polyamide black and zinc die; 1121-U204 for swinghandles, quarter turns and HVACR systems
-
Locking point with compression function for multiple interlocking, right version, Polyamide black and zinc die; 1121-U203 for swinghandles, quarter turns and HVACR systems
-
Locking point with compression function for multiple interlocking, left version, Stainless steel AISI 304 electropolished; 1121-SU537-LIPC for swinghandles, quarter turns and HVACR systems
-
Rod guide, Polyamide GF black; 1121-169 for horizontal flat rods
-
-
Latch-Hinge with pressure relief, round cylinder, keyed 9081, Polyamide GF black; 1091-U195 Prepared for emergency opening
-
Latch-Hinge without pressure relief, round cylinder keyed 9081, Polyamide GF black; 1091-U194 Prepared for emergency opening
-
Latch-Hinge with pressure relief, insert hexagon female SW 4, Polyamide GF black; 1091-U191 Prepared for emergency opening
-
Latch-Hinge without pressure relief, insert hexagon female SW 4, Polyamide GF black; 1091-U190 Prepared for emergency opening
-
Emergency opening for Latch-Hinge, Polyamide GF black; 1091-U175-60 Clearance T = 60 + 4.5 mm
-
Emergency opening for Latch-Hinge, Polyamide GF black; 1091-U175-50 Clearance T = 50 + 4.5 mm
-
Emergency opening for Latch-Hinge, Polyamide GF black; 1091-U175-30 Clearance T = 30 + 4.5 mm
-
3D Unit connector with recess, Aluminium; 1076-U17 with large adjustment range
-
180° Hinge without hinge pin, Stainless steel AISI 316 bright polished; 1056-U94-02 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Stainless steel AISI 316 polished; 1056-U94-01 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Aluminium raw; 1056-U92-03 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Aluminium black powder-coated; 1056-U92-02 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Aluminium anthracite anodized; 1056-U92-01 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Polyamide GF black; 1056-U91-01 Hinge unassembled; Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Zinc die black powder-coated; 1056-U89-02 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Zinc die chrome-plated; 1056-U89-01 Dimension 60 x 60 mm
-
180° Hinge without hinge pin, Stainless steel AISI 316 bright polished; 1056-U87-02 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Stainless steel AISI 316 polished; 1056-U87-01 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Aluminium raw; 1056-U85-03 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Aluminium black powder-coated; 1056-U85-02 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Aluminium anthracite anodized; 1056-U85-01 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Polyamide GF black; 1056-U84-01 Hinge unassembled; Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Zinc die black powder-coated; 1056-U82-02 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Zinc die chrome-plated; 1056-U82-01 Dimension 50 x 50 mm
-
180° Hinge without hinge pin, Stainless steel AISI 316 bright polished; 1056-U80-02 Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Stainless steel AISI 316 polished; 1056-U80-01 Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Aluminium raw; 1056-U78-03 Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Aluminium black powder-coated; 1056-U78-02 Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Aluminium anthracite anodized; 1056-U78-01 Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Polyamide GF black; 1056-U77-01 Hinge unassembled; Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Zinc die black powder-coated; 1056-U75-02 Dimension 40 x 40 mm
-
180° Hinge without hinge pin, Zinc die chrome-plated; 1056-U75-01 Dimension 40 x 40 mm
-
180° Hinge, Aluminium; 1056-U69 Dimension 60 x 60 mm
-
Clamping profile, Silicon solid material 60 ± 5 Shore A; 1030-S14 Seal made of FDA compliant material
-
Filler for clamping profile, Silicon solid material 85 ± 5 Shore A blue; 1030-S13 Seal made of FDA compliant material
-
Sealing profile, self-clamping, Silicon solid material 60 ± 5 Shore A blue; 1011-S143 Seal made of FDA compliant material
-
Sealing profile, self-clamping, Silicon solid material 60 ± 5 Shore A blue; 1011-S142 Seal made of FDA compliant material
-
Key handle SW 13, Polyamide sky blue; 1004-60 for quarter turn for hygienic areas
-
Compression latch double bit 5, Zinc die black powder-coated; 1000-U983 with nut, for cut out square 19.1 mm
-
Compression latch double bit 3, Zinc die black powder-coated; 1000-U982 with nut, for cut out square 19.1 mm
-
Compression latch, square 8, Stainless steel AISI 316; 1000-U981-01 with nut, for cut out square 19.1 mm
-
Compression latch, square 8, Zinc die black powder-coated; 1000-U981 with nut, for cut out square 19.1 mm
-
-
-
-
-
