EMKA Online-Catalog>
Nouveaux produits

Catégorie

Filter

Type de produit

module (3)
joint (3)
(2)
(2)
jonc de blocage (1)
connecteur modules (1)
marteau de secours (1)
(3)
charnière (26)
clé (1)
poignée escamotable, poignée à traction (12)
autre fermeture (8)
guide de tringle (1)
(3)
Quart de tour (9)
came (1)

Matériel de l'assemblage

zamak (26)
polyamide GF (12)
polyamide noir et zamak (9)
acier et polyamide GF sans halogène et ignifugé (1)
inox AISI 304 (1)
inox AISI 316 (9)
inox AISI 316L (2)
aluminium (11)

Surface de l'assemblage

chromé (5)
zingué (1)
noir (12)
époxy noir (15)
époxy noir pour l'extérieur (3)
époxy noir et zingué (3)
brut (3)
poli (3)
poli brillant (3)
anthracite anodisé (3)
électropoli (1)
décapé et passivé (1)
époxy gris RAL 7038 (5)
rouge (1)
époxy noir de sécurité (2)

Surface

noir (1)
bleu (3)
bleu ciel (1)

Normes

ⓘ Un article de type identique a été testé (5)
DIN EN 1672-2 (hygiène) (2)
DIN EN 14159 (hygiène) (2)
selon les directives DGUV (2)
EHEDG Certified (2)
DIN EN 61373 (contrôle de la résistance aux oscillations et aux chocs) (14)
DIN EN 1630 classe RC2 / WK2 (résistance) (5)
DIN EN 50102 - IK10 (résistance aux chocs) (5)
DIN EN 45545-3 classe E20 (protection incendie) (5)
DIN EN 45545-3 classe E60 (protection incendie) (2)
(1)
indice de protection IP 65 (18)
indice de protection IP 66 (3)
indice de protection IP 69K (2)

Programme

1000 (9)
1004 (1)
1011 (2)
1056 (25)
1079 (1)
1091 (7)
1110 (1)
1121 (6)
1130 (5)
1225 (4)
1317 (5)
2225 (6)
3000 (2)
5225 (1)

Empreintes

Cote GH, longueur de stator

18,0 mm (3)
31,0 mm (6)
32,0 mm (1)
42,0 mm (2)

Type de rotor

double barre 3 (2)
double barre 5 (2)
(1)
(1)
6 pans creux SW 4 (2)
tubus avec marquage (1)
carré 8 (1)
carré 8 avec marquage (2)
(1)

Position de montage

dans la zone étanche (30)
hors de la zone étanche (8)

Recommandé pour épaisseurs de porte de

1,0 mm (5)
1,2 mm (3)
1,5 mm (13)
2,0 mm (1)

Recommandé pour épaisseurs de porte jusqu'à

2,0 mm (5)
4,0 mm (3)
6,0 mm (3)
8,0 mm (3)
12,0 mm (1)
15,0 mm (1)
20,0 mm (6)

Élément de verrouillage

crémone (4)
came (24)
(2)

Type d'armoire

armoires individuelles (36)
armoires accolées / simple porte (37)
armoires accolées / double porte (29)

Position de porte

en applique (1)
invisible (33)

Butée de porte

Droite (56)
Gauche (58)

Dégondable

sans outil (4)
sans outil, à partir d'un angle d'ouverture de 90° (1)

Type de joint

joint d'étanchéité à clipser (2)
joint pare brise avec jonc de blocage (2)

Taille de tête stator

30 x 10 mm (1)
32 x 6 mm (5)
40 x 9,8 mm (1)

Serrures

demi-cylindre A=30 (3)
demi-cylindre A=35 (2)
barillet (9)
rotor (13)
(2)
bouton poussoir (4)
(1)

Type de fermeture

poignée rabattable avec fermeture à déclic (4)
verrou charnière (7)

Type de fixation cadre

à visser de l'extérieur (29)
à visser de l'extérieur, pour vis à petite tête fraisée M6 (1)

Type de fixation porte

à visser de l'extérieur (29)
à visser de l'intérieur (5)

Type de barillet

EMKA EK, clé EK 333 (4)
EMKA EK, clé différente (3)
clé 9081 (2)

nos meilleurs vendeurs:

Swinghandle "short" with RC2 for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U158-BOfor cam

Nouveaux produits

Emergency hammer with hand protection and holder with theft protection, Steel and Polyamide GF halogen-free and flame-retardant red; 5225-U315-01
ePush Lock electromechanical push lock with emergency opening for central locking and turn for emergency opening , polyamide GF noir; 3000-U600-03
ePush Lock electromechanical push lock with emergency opening for central locking, polyamide GF noir; 3000-U600-01
Locking set with insert double bit 3, Zinc die black powder-coated for outdoor use; 2225-U50-01 for short version
Locking set with round cylinder EK 333, Zinc die black powder-coated for outdoor use; 2225-U48-01 for short version
Flat swinghandle with compression function for locking set, Zinc die black powder-coated and zinc-plated; 2225-U3-RE Right version
Flat swinghandle with compression function for locking set, Zinc die black powder-coated and zinc-plated; 2225-U3-LI Left version
Flat swinghandle for locking set, Zinc die black powder-coated and zinc-plated; 2225-U2 Short version
Locking set for profile half cylinder 40, Zinc die black powder-coated for outdoor use; 2225-U11-01 for A = 30 mm, for short version
Swinghandle "short" with RC2 for iLOQ profile half cylinder, Zinc die grey powder-coated RAL 7038; 1317-U33 for cam
Swinghandle "short" with RC2 for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U158-BO for cam
Swinghandle "short" with RC2 for profile half cylinder 40 mm or 45 mm (A = 30 mm or 45 mm) with additional locking cam position 30°, Zinc die grey powder-coated RAL 7038; 1317-U157-BO for cam
Swinghandle "short" with RC2, with electromechanical release and for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U156-BO for cam
Swinghandle "short" with RC2, with electromechanical release and for profile half cylinder 40 mm or 45 mm (A = 30 mm or 45 mm), Zinc die grey powder-coated RAL 7038; 1317-U155-BO for cam
Swinghandle with insert double bit 5, Zinc die black powder-coated; 1225-U339
Swinghandle blind with push button, Zinc die black powder-coated; 1225-U326
Swinghandle with push button and round cylinder, keyed different, Zinc die black powder-coated; 1225-U303
Swinghandle with push button and round cylinder, keyed EK 333, Zinc die black powder-coated; 1225-U302
Chest handle keyed different, Polyamide black and zinc die signal black powder-coated; 1130-U17-01 with compression
Chest handle keyed different, Polyamide black and zinc die chrome-plated; 1130-U17 with compression
Roller cam height-adjustable, Polyamide black and zinc die zinc-plated; 1130-U16
Chest handle keyed EK 333, Polyamide black and zinc die signal black powder-coated; 1130-U15-01 with compression
Chest handle keyed EK 333, Polyamide black and zinc die chrome-plated; 1130-U15 with compression
Corner guide outside the sealing, Polyamide black and zinc die; 1121-U206 for multiple interlocking
Corner guide inside the sealing, Polyamide black and zinc die; 1121-U205 for multiple interlocking with compression function
Locking point with compression function for multiple interlocking, left version, Polyamide black and zinc die; 1121-U204 for swinghandles, quarter turns and HVACR systems
Locking point with compression function for multiple interlocking, right version, Polyamide black and zinc die; 1121-U203 for swinghandles, quarter turns and HVACR systems
Locking point with compression function for multiple interlocking, left version, Stainless steel AISI 304 electropolished; 1121-SU537-LIPC for swinghandles, quarter turns and HVACR systems
Rod guide, Polyamide GF black; 1121-169 for horizontal flat rods
180° Hinge with captive pin, Zinc die black powder-coated; 1110-U142
Latch-Hinge with pressure relief, round cylinder, keyed 9081, Polyamide GF black; 1091-U195 Prepared for emergency opening
Latch-Hinge without pressure relief, round cylinder keyed 9081, Polyamide GF black; 1091-U194 Prepared for emergency opening
Latch-Hinge with pressure relief, insert hexagon female SW 4, Polyamide GF black; 1091-U191 Prepared for emergency opening
Latch-Hinge without pressure relief, insert hexagon female SW 4, Polyamide GF black; 1091-U190 Prepared for emergency opening
ouverture de secours pour le verrou charnière, polyamide GF noir; 1091-U175-60 cote T = 60 + 4,5 mm
ouverture de secours pour le verrou charnière, polyamide GF noir; 1091-U175-50 cote T = 50 + 4,5 mm
ouverture de secours pour le verrou charnière, polyamide GF noir; 1091-U175-30 cote T = 30 + 4,5 mm
3D Unit connector with recess, Aluminium; 1076-U17 with large adjustment range
Charnière à 180° sans axe de charnière, inox AISI 316 poli brillant; 1056-U94-02 Dimension 60 x 60 mm
Charnière à 180° sans axe de charnière, inox AISI 316 poli; 1056-U94-01 Dimension 60 x 60 mm
180° Hinge without hinge pin, Aluminium raw; 1056-U92-03 Dimension 60 x 60 mm
Charnière à 180° sans axe de charnière, aluminium époxy noir; 1056-U92-02 Dimension 60 x 60 mm
Charnière à 180° sans axe de charnière, aluminium anthracite anodisé; 1056-U92-01 Dimension 60 x 60 mm
180° Hinge without hinge pin, Polyamide GF black; 1056-U91-01 Hinge unassembled; Dimension 60 x 60 mm
Charnière à 180° sans axe de charnière, zamak époxy noir; 1056-U89-02 Dimension 60 x 60 mm
Charnière à 180° sans axe de charnière, zamak chromé; 1056-U89-01 Dimension 60 x 60 mm
Charnière à 180° sans axe de charnière, inox AISI 316 poli brillant; 1056-U87-02 Dimension 50 x 50 mm
Charnière à 180° sans axe de charnière, inox AISI 316 poli; 1056-U87-01 Dimension 50 x 50 mm
180° Hinge without hinge pin, Aluminium raw; 1056-U85-03 Dimension 50 x 50 mm
Charnière à 180° sans axe de charnière, aluminium époxy noir; 1056-U85-02 Dimension 50 x 50 mm
Charnière à 180° sans axe de charnière, aluminium anthracite anodisé; 1056-U85-01 Dimension 50 x 50 mm
180° Hinge without hinge pin, Polyamide GF black; 1056-U84-01 Hinge unassembled; Dimension 50 x 50 mm
Charnière à 180° sans axe de charnière, zamak époxy noir; 1056-U82-02 Dimension 50 x 50 mm
Charnière à 180° sans axe de charnière, zamak chromé; 1056-U82-01 Dimension 50 x 50 mm
Charnière à 180° sans axe de charnière, inox AISI 316 poli brillant; 1056-U80-02 Dimension 40 x 40 mm
Charnière à 180° sans axe de charnière, inox AISI 316 poli; 1056-U80-01 Dimension 40 x 40 mm
180° Hinge without hinge pin, Aluminium raw; 1056-U78-03 Dimension 40 x 40 mm
Charnière à 180° sans axe de charnière, aluminium époxy noir; 1056-U78-02 Dimension 40 x 40 mm
Charnière à 180° sans axe de charnière, aluminium anthracite anodisé; 1056-U78-01 Dimension 40 x 40 mm
180° Hinge without hinge pin, Polyamide GF black; 1056-U77-01 Hinge unassembled; Dimension 40 x 40 mm
Charnière à 180° sans axe de charnière, zamak époxy noir; 1056-U75-02 Dimension 40 x 40 mm
Charnière à 180° sans axe de charnière, zamak chromé; 1056-U75-01 Dimensions 40 x 40mm
Charnière 180°, aluminium; 1056-U69 Dimension 60 x 60 mm
Clamping profile, Silicon solid material 60 ± 5 Shore A; 1030-S14 Seal made of FDA compliant material
Filler for clamping profile, Silicon solid material 85 ± 5 Shore A blue; 1030-S13 Seal made of FDA compliant material
Sealing profile, self-clamping, Silicon solid material 60 ± 5 Shore A blue; 1011-S143 Seal made of FDA compliant material
Sealing profile, self-clamping, Silicon solid material 60 ± 5 Shore A blue; 1011-S142 Seal made of FDA compliant material
Clé avec poignée SW13, polyamide bleu ciel; 1004-60 pour quart de tour hygiénique
Compression latch double bit 5, Zinc die black powder-coated; 1000-U983 with nut, for cut out square 19.1 mm
Compression latch double bit 3, Zinc die black powder-coated; 1000-U982 with nut, for cut out square 19.1 mm
Compression latch, square 8, Stainless steel AISI 316; 1000-U981-01 with nut, for cut out square 19.1 mm
Compression latch, square 8, Zinc die black powder-coated; 1000-U981 with nut, for cut out square 19.1 mm
quart de tour carré 8 hygiénique pour applications alimentaires et médicales, inox AISI 316L; 1000-U960-01 avec écrou inox
Quarter turn with cover, railway version with outer rack, Stainless steel AISI 316; 1000-U958 for bottom locks
quart de tour triangle 8 hygiénique pour applications alimentaires et médicales, inox AISI 316L; 1000-U941-01 avec écrou inox
Compression latch with tube, Zinc die black powder-coated; 1000-U833 with nut
Verrou à compression carré 8 avec OPEN - CLOSED indicateur, version gauche, inox AISI 316 décapé et passivé; 1000-SU1222 avec écrou inox

nos meilleurs vendeurs:

Swinghandle "short" with RC2 for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U158-BOfor cam

Nouveaux produits

Locking set with insert double bit 3, Zinc die black powder-coated for outdoor use; 2225-U50-01 for short version

Locking set with round cylinder EK 333, Zinc die black powder-coated for outdoor use; 2225-U48-01 for short version

Flat swinghandle with compression function for locking set, Zinc die black powder-coated and zinc-plated; 2225-U3-RE Right version

Flat swinghandle with compression function for locking set, Zinc die black powder-coated and zinc-plated; 2225-U3-LI Left version

Flat swinghandle for locking set, Zinc die black powder-coated and zinc-plated; 2225-U2 Short version

Locking set for profile half cylinder 40, Zinc die black powder-coated for outdoor use; 2225-U11-01 for A = 30 mm, for short version

Swinghandle "short" with RC2 for iLOQ profile half cylinder, Zinc die grey powder-coated RAL 7038; 1317-U33 for cam

Swinghandle "short" with RC2 for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U158-BO for cam

Swinghandle "short" with RC2 for profile half cylinder 40 mm or 45 mm (A = 30 mm or 45 mm) with additional locking cam position 30°, Zinc die grey powder-coated RAL 7038; 1317-U157-BO for cam

Swinghandle "short" with RC2, with electromechanical release and for KABA type 1514, Zinc die grey powder-coated RAL 7038; 1317-U156-BO for cam

Swinghandle "short" with RC2, with electromechanical release and for profile half cylinder 40 mm or 45 mm (A = 30 mm or 45 mm), Zinc die grey powder-coated RAL 7038; 1317-U155-BO for cam

Chest handle keyed different, Polyamide black and zinc die signal black powder-coated; 1130-U17-01 with compression

Chest handle keyed different, Polyamide black and zinc die chrome-plated; 1130-U17 with compression

Chest handle keyed EK 333, Polyamide black and zinc die signal black powder-coated; 1130-U15-01 with compression

Chest handle keyed EK 333, Polyamide black and zinc die chrome-plated; 1130-U15 with compression

Corner guide outside the sealing, Polyamide black and zinc die; 1121-U206 for multiple interlocking

Corner guide inside the sealing, Polyamide black and zinc die; 1121-U205 for multiple interlocking with compression function

Locking point with compression function for multiple interlocking, left version, Polyamide black and zinc die; 1121-U204 for swinghandles, quarter turns and HVACR systems

Locking point with compression function for multiple interlocking, right version, Polyamide black and zinc die; 1121-U203 for swinghandles, quarter turns and HVACR systems

Locking point with compression function for multiple interlocking, left version, Stainless steel AISI 304 electropolished; 1121-SU537-LIPC for swinghandles, quarter turns and HVACR systems

Rod guide, Polyamide GF black; 1121-169 for horizontal flat rods

Latch-Hinge with pressure relief, round cylinder, keyed 9081, Polyamide GF black; 1091-U195 Prepared for emergency opening

Latch-Hinge without pressure relief, round cylinder keyed 9081, Polyamide GF black; 1091-U194 Prepared for emergency opening

Latch-Hinge with pressure relief, insert hexagon female SW 4, Polyamide GF black; 1091-U191 Prepared for emergency opening

Latch-Hinge without pressure relief, insert hexagon female SW 4, Polyamide GF black; 1091-U190 Prepared for emergency opening

ouverture de secours pour le verrou charnière, polyamide GF noir; 1091-U175-60 cote T = 60 + 4,5 mm

ouverture de secours pour le verrou charnière, polyamide GF noir; 1091-U175-50 cote T = 50 + 4,5 mm

ouverture de secours pour le verrou charnière, polyamide GF noir; 1091-U175-30 cote T = 30 + 4,5 mm

3D Unit connector with recess, Aluminium; 1076-U17 with large adjustment range

Charnière à 180° sans axe de charnière, inox AISI 316 poli brillant; 1056-U94-02 Dimension 60 x 60 mm

Charnière à 180° sans axe de charnière, inox AISI 316 poli; 1056-U94-01 Dimension 60 x 60 mm

180° Hinge without hinge pin, Aluminium raw; 1056-U92-03 Dimension 60 x 60 mm

Charnière à 180° sans axe de charnière, aluminium époxy noir; 1056-U92-02 Dimension 60 x 60 mm

Charnière à 180° sans axe de charnière, aluminium anthracite anodisé; 1056-U92-01 Dimension 60 x 60 mm

180° Hinge without hinge pin, Polyamide GF black; 1056-U91-01 Hinge unassembled; Dimension 60 x 60 mm

Charnière à 180° sans axe de charnière, zamak époxy noir; 1056-U89-02 Dimension 60 x 60 mm

Charnière à 180° sans axe de charnière, zamak chromé; 1056-U89-01 Dimension 60 x 60 mm

Charnière à 180° sans axe de charnière, inox AISI 316 poli brillant; 1056-U87-02 Dimension 50 x 50 mm

Charnière à 180° sans axe de charnière, inox AISI 316 poli; 1056-U87-01 Dimension 50 x 50 mm

180° Hinge without hinge pin, Aluminium raw; 1056-U85-03 Dimension 50 x 50 mm

Charnière à 180° sans axe de charnière, aluminium époxy noir; 1056-U85-02 Dimension 50 x 50 mm

Charnière à 180° sans axe de charnière, aluminium anthracite anodisé; 1056-U85-01 Dimension 50 x 50 mm

180° Hinge without hinge pin, Polyamide GF black; 1056-U84-01 Hinge unassembled; Dimension 50 x 50 mm

Charnière à 180° sans axe de charnière, zamak époxy noir; 1056-U82-02 Dimension 50 x 50 mm

Charnière à 180° sans axe de charnière, zamak chromé; 1056-U82-01 Dimension 50 x 50 mm

Charnière à 180° sans axe de charnière, inox AISI 316 poli brillant; 1056-U80-02 Dimension 40 x 40 mm

Charnière à 180° sans axe de charnière, inox AISI 316 poli; 1056-U80-01 Dimension 40 x 40 mm

180° Hinge without hinge pin, Aluminium raw; 1056-U78-03 Dimension 40 x 40 mm

Charnière à 180° sans axe de charnière, aluminium époxy noir; 1056-U78-02 Dimension 40 x 40 mm

Charnière à 180° sans axe de charnière, aluminium anthracite anodisé; 1056-U78-01 Dimension 40 x 40 mm

180° Hinge without hinge pin, Polyamide GF black; 1056-U77-01 Hinge unassembled; Dimension 40 x 40 mm

Charnière à 180° sans axe de charnière, zamak époxy noir; 1056-U75-02 Dimension 40 x 40 mm

Charnière à 180° sans axe de charnière, zamak chromé; 1056-U75-01 Dimensions 40 x 40mm

Charnière 180°, aluminium; 1056-U69 Dimension 60 x 60 mm

Clamping profile, Silicon solid material 60 ± 5 Shore A; 1030-S14 Seal made of FDA compliant material

Filler for clamping profile, Silicon solid material 85 ± 5 Shore A blue; 1030-S13 Seal made of FDA compliant material

Sealing profile, self-clamping, Silicon solid material 60 ± 5 Shore A blue; 1011-S143 Seal made of FDA compliant material

Sealing profile, self-clamping, Silicon solid material 60 ± 5 Shore A blue; 1011-S142 Seal made of FDA compliant material

Clé avec poignée SW13, polyamide bleu ciel; 1004-60 pour quart de tour hygiénique

Compression latch double bit 5, Zinc die black powder-coated; 1000-U983 with nut, for cut out square 19.1 mm

Compression latch double bit 3, Zinc die black powder-coated; 1000-U982 with nut, for cut out square 19.1 mm

Compression latch, square 8, Stainless steel AISI 316; 1000-U981-01 with nut, for cut out square 19.1 mm

Compression latch, square 8, Zinc die black powder-coated; 1000-U981 with nut, for cut out square 19.1 mm

quart de tour carré 8 hygiénique pour applications alimentaires et médicales, inox AISI 316L; 1000-U960-01 avec écrou inox

Quarter turn with cover, railway version with outer rack, Stainless steel AISI 316; 1000-U958 for bottom locks

quart de tour triangle 8 hygiénique pour applications alimentaires et médicales, inox AISI 316L; 1000-U941-01 avec écrou inox

Compression latch with tube, Zinc die black powder-coated; 1000-U833 with nut

Verrou à compression carré 8 avec OPEN - CLOSED indicateur, version gauche, inox AISI 316 décapé et passivé; 1000-SU1222 avec écrou inox