Category

Filter

Product type
  1. Handle (1)
  2. Cap (1)
  3. Swinghandle, Lifthandle (271)
Material of the module
  1. Zinc die (83)
  2. Zinc die and polyamide (3)
  3. Zinc die and polyamide GF (2)
  4. Zinc die white aluminium powder-coated and polyamide GF (10)
  5. Polyamide GF (118)
  6. Polyamide and zinc die (49)
  7. Stainless steel AISI 316 (5)
Surface of the module
  1. black (131)
  2. black powder-coated (115)
  3. black powder-coated for outdoor use (1)
  4. black powder-coated and zinc-plated (3)
  5. grey RAL 7038 (1)
  6. grey powder-coated (1)
  7. grey powder-coated RAL 7038 (10)
  8. grey powder-coated RAL 7038 and anti-graffiti coated (3)
Standards
  1. DIN EN 61373 (shock and vibration testing) (24)
  2. DIN EN 1630 class RC2 / WK2 (resistivity) (23)
  3. DIN EN 50102 - IK10 (shock resistance) (18)
  4. CNOMO standard (from France) (1)
  5. Protection class IP 40 (31)
  6. Protection class IP 54 (10)
  7. Protection class IP 65 (172)
  8. Protection class IP 66 (7)
Program
  1. 1107 (10)
  2. 1125 (47)
  3. 1150 (79)
  4. 1151 (2)
  5. 1152 (7)
  6. 1153 (2)
  7. 1154 (12)
  8. 1155 (3)
  9. 1160 (12)
  10. 1180 (3)
  11. 1185 (4)
  12. 1225 (29)
  13. 1317 (32)
  14. 1325 (9)
  15. 2100 (3)
  16. 2225 (4)
  17. 3000 (14)
Cut outs
  1. 0951-1107-010951-1107-020951-1107-030951-1107-040951-1107-050951-1107-060951-1107-070951-1107-080951-1125-010951-1125-020951-1125-030951-1150-010951-1150-020951-1151-010951-1152-010951-1154-010951-1160-010951-1180-010951-1180-020951-1225-010951-1225-020951-1240-010951-1325-020951-2100-010951-3000-01
Dimension GH, length of housing
  1. 18.0 mm (57)
  2. 20.0 mm (50)
  3. 28.0 mm (3)
  4. 32.0 mm (1)
  5. 42.0 mm (2)
Insert type
  1. Hexagon male SW 11 (1)
  2. Double bit 3 (14)
  3. Double bit 5 (13)
  4. Triangular 6.5 CNOMO (2)
  5. Triangular 7 (8)
  6. Triangular 8 (7)
  7. Hexagon female SW 8 with pin (1)
  8. Hexagon female SW 10 (1)
  9. Slot 1.2 x 3 coinproof (1)
  10. Slot 2 x 4 (8)
  11. Square 6 (5)
  12. Square 7 (4)
  13. Square 8 (9)
Mounting position
  1. Inside the sealing (271)
  2. Outside the sealing (137)
Recommended for door thickness from
  1. 0.80 mm (1)
  2. 1.0 mm (55)
  3. 1.2 mm (4)
  4. 1.5 mm (102)
  5. 2.0 mm (37)
  6. 16.0 mm (2)
Recommended for door thickness up to
  1. 2.0 mm (80)
  2. 2.5 mm (15)
  3. 3.0 mm (48)
  4. 4.0 mm (9)
  5. 5.0 mm (6)
  6. 6.0 mm (3)
  7. 10.0 mm (6)
  8. 12.0 mm (32)
  9. 20.0 mm (2)
Locking component
  1. Rod control (148)
  2. Cam (177)
  3. Bearing bush with cam (71)
  4. Furniture lock (2)
Door version
  1. Right (270)
  2. Left (269)
Locking set
  1. No locking set, blind (1)
  2. Profile half cylinder A = 30 (69)
  3. Profile half cylinder A = 35 (34)
  4. Round cylinder (63)
  5. Insert (75)
  6. Combination lock (3)
  7. ASSA cylinder (1)
  8. KABA cylinder (2)
  9. KABA type 1514 (2)
  10. KABA cylinder Micron Plus differently keyed (1)
  11. Electromechanical release (14)
  12. Push button (12)
  13. Padlock (29)
  14. iLOQ No. D50S.511.SD (recommended) or D50S.111.SD (3)
Fixing of dish
  1. Screw-on cap IP 65 (99)
  2. Hook IP 40 (14)
  3. Clip-in cap IP 40 (11)
  4. Screw-on cap IP 66 (1)
Round cylinder type
  1. EMKA EK, keyed EK 333 (41)
  2. EMKA EK, differently keyed (27)
Swinghandles inside the sealing

Our Topseller:

Swinghandle with hook and locking set for profile half cylinder 40 mm (A = 30 mm), Polyamide GF black; 1325-U1-01

Swinghandle with hook and locking set for profile half cylinder 40 mm (A = 30 mm), Polyamide GF black; 1325-U1-01

Swinghandles inside the sealing

273 Products on this side

Set Ascending Direction
Page:
  2. 1
  3. 2
  4. 3
  5. 4

273 Products on this side

Set Ascending Direction
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  • Call back service
  • News
  • Product News
  • Exhibitions
Contact

Find your contact person near you:

EMKA worldwide

Service
Newsletter
Copyright © 2023