Category

Filter

Category
    1. Locks and Latches
    2. Locking Systems
    3. Hinges
    4. Sealing Profiles and Edge Protection
    5. Accessories
    6. New Products
Threaded stud
  1. M5 x 10 (2)
  2. M5 x 12 (2)
  3. M5 x 15 (1)
  4. M6 x 12 (4)
  5. M6 x 15 (1)
  6. M8 x 14 (4)
Product type
  1. Adapter (8)
  2. Rod (12)
  3. Aluminium windows (11)
  4. Locking set (50)
  5. Fixing material for swinghandle (9)
  6. Insert (25)
  7. Insert cam (7)
  8. Seal (230)
  9. O-ring and flat seal (1)
  10. ELM - EMKA Control Cockpit (3)
  11. Housing (3)
  12. Handle (1)
  13. Cable shunting ring (1)
  14. Card reader / Keypad (1)
  15. Assembly (1)
  16. Nut (7)
  17. Profile half cylinder (23)
  18. Hinge (15)
  19. Keys (5)
  20. Escutcheon (4)
  21. Screw (19)
  22. Shoe (1)
  23. Swinghandle, Lifthandle (33)
  24. Other latch (16)
  25. Rod guide (19)
  26. Rod control accessories (1)
  27. Door stoppers (1)
  28. Connector (1)
  29. Catch (6)
  30. Quarter turn (82)
  31. Accessories general (1)
  32. Cam (13)
Material of the module
  1. Zinc die (106)
  2. Zinc die and steel (4)
  3. Zinc die and polyamide (1)
  4. Polyamide (10)
  5. Polyamide GF (109)
  6. Polyamide 66 GF 50 (3)
  7. Polyamide and zinc die (6)
  8. Steel (10)
  9. Stainless steel AISI 303 (3)
  10. Stainless steel AISI 304 (1)
  11. Stainless steel AISI 316 (8)
  12. Aluminium (11)
  13. Aluminium hard anodized and stainless steel AISI 316 (2)
  14. Brass and zinc die (2)
  15. nickel silver with black polamide head (2)
  16. Bio-Flex (1)
Surface of the module
  1. chrome-plated (58)
  2. zinc-plated (11)
  3. black (122)
  4. black powder-coated (45)
  5. nickel-plated (2)
  6. anodized (11)
  7. grey powder-coated (1)
  8. grey powder-coated RAL 7038 (4)
  9. grey powder-coated RAL 7038 and anti-graffiti coated (2)
  10. silver grey metallic (2)
material
  1. Brass (2)
  2. CR (112)
  3. EPDM (118)
  4. PC+ABS-FR (1)
  5. Perbunan (1)
  6. Plastic (1)
  7. Polyamide (7)
  8. Polyamide GF (30)
  9. Polyamide GF V0 (1)
  10. Polyamide V0 (1)
  11. Stainless steel AISI 303 (2)
  12. Stainless steel AISI 304 (1)
  13. Stainless steel AISI 316 (2)
  14. Steel (25)
  15. Zinc die (15)
Surface
  1. chrome-plated (6)
  2. black (27)
  3. black powder-coated (4)
  4. zinc-plated (30)
  5. nickel-plated (2)
  6. raw (1)
  7. electropolished (1)
  8. black stretch eliminating and self-adhesive (230)
  9. silver grey metallic (15)
Standards
  1. ⓘ An article of the same design was tested (15)
  2. VDI 6022 (hygiene for HVACR systems) (115)
  3. DIN EN 61373 (shock and vibration testing) (32)
  4. DIN EN 1630 class RC2 / WK2 (resistivity) (12)
  5. DIN EN 50102 - IK10 (shock resistance) (12)
  6. DIN EN 45545-2 class E20 (fire protection) (1)
  7. DIN EN 45545-3 class E20 (fire protection) (11)
  8. DIN EN 45545-3 class E60 (fire protection) (4)
  9. CNOMO standard (from France) (2)
  10. Protection class IP 40 (3)
  11. Protection class IP 50 (1)
  12. Protection class IP 65 (86)
  13. Protection class IP 66 (4)
  14. Protection class IP 68 (1)
  15. Protection class IP 69K (1)
Program
  1. 1000 (80)
  2. 1001 (3)
  3. 1004 (2)
  4. 1012 (1)
  5. 1016 (230)
  6. 1022 (49)
  7. 1056 (14)
  8. 1071 (1)
  9. 1076 (1)
  10. 1087 (1)
  11. 1089 (4)
  12. 1091 (16)
  13. 1095 (1)
  14. 1108 (3)
  15. 1109 (41)
  16. 1121 (26)
  17. 1125 (11)
  18. 1150 (17)
  19. 1185 (1)
  20. 1190 (4)
  21. 1200 (8)
  22. 1210 (5)
  23. 1220 (2)
  24. 1317 (12)
  25. 1325 (10)
  26. 1390 (10)
  27. 1500 (21)
  28. 2100 (29)
  29. 2200 (1)
  30. 2300 (1)
  31. 3000 (4)
Cut outs
  1. 0951-1000-010951-1012-010951-1022-010951-1022-020951-1091-070951-1091-180951-1091-220951-1107-050951-1107-060951-1107-070951-1107-080951-1121-150951-1125-010951-1150-010951-1150-020951-1325-010951-1325-020951-1390-010951-1500-01
Dimension GH, length of housing
  1. 13.5 mm (39)
  2. 18.0 mm (29)
  3. 19.5 mm (2)
  4. 20.0 mm (6)
  5. 31.0 mm (15)
Handle type
  1. Wing knob (16)
  2. T-handle, small (3)
  3. T-handle (3)
  4. L-handle (8)
Insert type
  1. Hexagon male SW 10 (2)
  2. Hexagon male SW 10 with marking (2)
  3. Hexagon male SW 11 (1)
  4. Hexagon male SW 11.1 with marking (2)
  5. Daimler Benz (3)
  6. Double bit 3 (7)
  7. Double bit 5 (6)
  8. Triangular 6.5 CNOMO (3)
  9. Triangular 7 (4)
  10. Triangular 8 (5)
  11. Triangular 9 (1)
  12. Triangular 10 (2)
  13. Fiat (1)
  14. Hexagon female SW 4 (6)
  15. Hexagon female SW 8 (6)
  16. Hexagon female SW 8 with pin (5)
  17. Hexagon female SW 10 (6)
  18. Eastern Europe Ø 13 half-round (2)
  19. Slot 1.2 x 3 coinproof (4)
  20. Slot 1.5 x 3 (7)
  21. Slot 2 x 2.5 coinproof (1)
  22. Slot 2 x 4 (40)
  23. Slot 2 x 4 coinproof (3)
  24. Square 6 (4)
  25. Square 7 (5)
  26. Square 8 (4)
  27. Square 8 with slot (1)
Mounting position
  1. Inside the sealing (135)
  2. Outside the sealing (56)
Recommended for door thickness from
  1. 0.50 mm (16)
  2. 0.75 mm (8)
  3. 0.80 mm (12)
  4. 1.0 mm (11)
  5. 1.2 mm (27)
  6. 1.5 mm (28)
  7. 2.0 mm (15)
  8. 2.5 mm (3)
Recommended for door thickness up to
  1. 1.5 mm (3)
  2. 2.0 mm (16)
  3. 2.2 mm (8)
  4. 2.5 mm (2)
  5. 3.0 mm (18)
  6. 5.0 mm (29)
  7. 5.5 mm (2)
  8. 6.0 mm (2)
  9. 6.9 mm (1)
  10. 8.0 mm (10)
  11. 12.0 mm (14)
  12. 20.0 mm (15)
Locking component
  1. Rod control (12)
  2. Cam (111)
  3. Bearing bush with cam (4)
  4. Integrated rod control (11)
Assembly
  1. Pre-assembly of bottom part (5)
  2. Pre-assembly on flat rod (6)
  3. Pre-assembly of rod guide (4)
  4. Flat rod will clip-in (7)
  5. Rod guide clip-in, flat rod will clip-in (1)
  6. Cover will clip-on (4)
  7. Rod guide clamp-on / clip-in (1)
Cabinet type
  1. Single cabinets (29)
  2. In-line cabinets with single door (29)
  3. In-line cabinets with double door (14)
Door return
  1. 6.9 mm (1)
  2. 20 mm (1)
  3. 25 mm (14)
Door position
  1. prominent (1)
  2. concealed (28)
Door version
  1. Right (144)
  2. Left (144)
Adjustable
  1. 2D (1)
  2. 3D (11)
Max. opening angle
  1. 135° (1)
  2. 160° (2)
  3. 180° (25)
  4. 270° (1)
Locking type
  1. Round cylinder (3)
  2. Knob handle (5)
Locking type
  1. The modular HVACR program (0)
  2. Heavy duty latch, classic (0)
  3. Heavy duty latch, quarter turn type (0)
  4. Outside heavy duty latch (0)
  5. HVACR compression latch (0)
Dimension A
  1. A 20 (1)
  2. A 26 (1)
Number of possible locking points
  1. 1 point1 point (161)
  2. 2 points2 points (69)
  3. 3 point3 point (50)
  4. 4 point (23)
  5. More than 4 points available on request (17)
  6. 5 point (1)
  7. One connecting rod 1, two connecting rods 2 (0)
  8. One conneting 2, two connecting rods 4 (0)
Dimension A
Locking type
  1. Latch-Hinge (14)
  2. Cam lock (2)
Aluminium window type
  1. Aluminium window without frame (4)
  2. Aluminium window with 30 mm frame (4)
  3. Aluminium window with 61 mm frame (3)
Fixing of dish
  1. Screw-on cap IP 65 (18)
  2. Clip-in cap IP 40 (2)
Fixing type of housing
  1. nut fixing (68)
  2. clip-in (1)
  3. spring fixing (8)
  4. clamp-on / clip fix (15)
  5. rivetable (1)
Mounting type on the frame
  1. screw-on from outside (14)
  2. screw-on from inside (15)
Mounting type on the door
  1. screw-on from outside (15)
  2. screw-on from inside (13)
  3. screw-on (1)
Flat rod outside
  1. Flat rod with locking slider (1)
  2. Flat rod with double roller (4)
  3. Flat rod with single roller (4)
  4. Flat rod with notch (3)
Handle type
  1. Swinghandle (28)
  2. Lifthandle (5)
Round cylinder type
  1. EMKA EK, keyed EK 333 (11)
  2. EMKA EK, differently keyed (11)
  3. EMKA X, keyed 2233X (19)
  4. EMKA X, differently keyed (18)
  5. Key system 9081 (4)
  6. Key system 9081, differently keyed (4)

Search results for '1210 x'

610 Products on this side

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

610 Products on this side

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Call back service
  • News
  • Product News
  • Exhibitions
Contact

Find your contact person near you:

EMKA worldwide

Service
Newsletter
Copyright © 2023