Skip to main content
Header Main Image

Quarter turn for quick mounting

Program 1000

Specifications

Further information/CAD

Article information

This page contains articles by following specifications

Quarter turns, Compression latches, Heavy duty latches for big door gauges

Quarter turns

The quarter turn for quick assembly can be clipped in within a few seconds.

Product features at a glance:

  • Standard cut out 1000
  • Insert part: zamac
  • Three standard height dimensions (H) for Polyamide snap-in pins H=18, H=22 and H=24, each for four different door thickness ranges
  • Further versions of snap-in pins with regard to the height dimension on request
  • Cost saving by tool-less assembly within seconds
  • Groundprinciple of this patented solution:
    the higher the closing force, the greater the tightness
  • Snap-in pin with safety cap for better insolation of the insert
  • High IP-protection (IP 69K)
  • High safeguarding against overwinding
  • Patented

 Assembly note:

Assembly door stop on the right:
Pre-assembled insert unit is inserted into the cutout while the insert is closed. Then it is fixed by the snap-in cam.

Assembly door stop on the left:
Pre-assembled insert unit is inserted into the cutout while the insert is closed. Then it is fixed by the snap-in cam.

Art.-Nr.ArticleWeightTrading unitPUEx stockSTEPIGES
1000-590Snap-in cam, H=18, Ts=1.0 - 1.50,01115 kg11000X1000-5901000-590
1000-591Snap-in cam, H=18, Ts=1.5 - 2.00,01109 kg11000X1000-5911000-591
1000-592Snap-in cam, H=18, Ts=2.0 - 2.50,0109 kg11000X1000-5921000-592
1000-593Snap-in cam, H=18, Ts=2.5 - 3.00,01103 kg11000X1000-5931000-593
1000-594Snap-in cam, H=22, Ts=1.0 - 1.50,0116 kg11000X
1000-595Snap-in cam, H=22, Ts=1.5 - 2.00,01169 kg11000X1000-5951000-595
1000-597Snap-in cam, H=22, Ts=2.5 - 3.00,0113 kg11000X1000-5971000-597
1000-598Snap-in cam, H=24, Ts=1.0 - 1.50,01194 kg11000X1000-5981000-598
1000-599Snap-in cam, H=24, Ts=1.5 - 2.00,0118 kg11000X1000-5991000-599
1000-600Snap-in cam, H=24, Ts=2.0 - 2.50,0117 kg11000X1000-6001000-600
1000-601Snap-in cam, H=24, Ts=2.5 - 3.00,01178 kg11000X1000-6011000-601
1000-602Snap-in cam, H=22, Ts=2.0 - 2.50,0114 kg11000X1000-6021000-602
1000-603Safety cap for snap-in cam0,00089 kg11X1000-6031000-603
1000-U902Insert unit square 70,01921 kg11X1000-U9021000-U902
1000-U903Insert unit square 80,01954 kg11X1000-U9031000-U903
1000-U904Insert unit triangular 80,0189 kg11X1000-U9041000-U904
1000-U905Insert unit double bit 30,02051 kg11X1000-U9051000-U905
1000-U907Insert unit slot 2 x 40,02265 kg11X1000-U9071000-U907
1000-U908Insert unit square 8mm with M6 thread for wing knob0,01793 kg11000X1000-U9081000-U908