Swinghandle "short" with RC2, with electromechanical release and for profile half cylinder 40 mm or 45 mm (A = 30 mm or 45 mm), Zinc die grey powder-coated RAL 7038; 1317-U155-BO

for cam
Article number: 1317-U155-BO
Catalogue page: 3AB-180
Program: 1317
  • Türanschlag - Right, Left
Rotate
Zoom
Rotate + Zoom
Swinghandle "short" with RC2, with electromechanical release and for profile half cylinder 40 mm or 45 mm (A = 30 mm or 45 mm), Zinc die grey powder-coated RAL 7038; 1317-U155-BO for cam
Article number: 1317-U155-BO
Catalogue page: 3AB-180
Program: 1317
  • Türanschlag - Right, Left

Product advantages

  • The swinghandle has successfully passed the RC2 DIN EN 1630 test
  • The test protection class IK 10 according to DIN EN 50102 was successfully passed
  • Integrated scratch protection prevents surface damage (handle / dish)


Product information

1 = white = motor V +
2 = brown = V -
3 = green = LED V +
4 = yellow = reed contact
5 = grey = -
6 = pink = motor position 1
7 = blue = motor position 2
8 = red = push button
E = The pins 4, 6, 7, 8 must be provided with a pull-up resistor, pin 5 can be provided with a pull-up resistor. The motor must be directly controlled by a higher-level controller and can only be moved in one direction. To set the lock in the required status (locked/unlocked), not only the motor must be controlled, but also the motor position switches must be interrogated and evaluated. The following table serves to identify the corresponding status.
F = motor position 1
G = motor position 2
H = handle status
10 = logical 0
11 = logical 1
12 = locked
13 = not defined
14 = unlocked


RC2 DIN EN 1630, is achieved with profily half cylinder according to DIN EN 18252-BZ or DIN EN 1303 with the attacking resistance class 2 with protection against drilling and pulling. The profile half-cylinder should be certified and monitored by PIV CERT or alternatively by a certifying body according to DIN EN ISO/IEC 17065.


Note: Without profile half cylinder opening is only possible with key 1004-44-01AA.
Profile half cylinder: 40 mm and 45 mm; Set locking cam to 6 or 7 o'clock. At 3 or 5 o'clock no push-to-close
Sealable: Yes
Application range: Indoor and outdoor at -30°C up to +80°C
Connection type: Plug RJ45 with connection cable (4 m)
Release: By applying a 3 - 3.6 V DC signal
Wake-up function: Yes, by push button
Display: LED
Remote monitoring: By built-in reed contact
Locking: Push handle into recess until locking mechanism engages
Emergency opening: Optional with 40 mm or 45 mm profile half cylinder
Ts > 6 mm - 8 mm on request

Whether the handle is open can be queried via a reed contact.
The push button can be used for interaction in any form, as well as the LED for indication in any way.

Assembly instruction

In case of the mechanical and the electromechanical model, only the profile half-cylinder according to DIN EN 18252 and DIN EN 1303 can be used.


Wishlist / Requests
OR
Properties

Additional Information

Foamed gasket Yes
Door version Right, Left
Locking set Profile half cylinder A = 30, Profile half cylinder A = 35
Door return variable Yes
Mounting position Inside the sealing
Door revolvable / reversible Yes
Locking component Cam
Number of possible locking points 1 point, 2 points, 3 point
Electromechanical release 3 - 3.6 V
Number of locking sets One locking set and electromechanical version
Emergency opening Yes
Sealable Yes
Integrated scratch protection Yes
Shock and vibration testing according to DIN EN 61373 Yes
Test according to RC2 DIN EN 1630 (WK2 DIN V ENV 1630) Yes
Test rating IK 10 following DIN EN 50102 Yes
Locking set cover Yes
Standards DIN EN 61373 (shock and vibration testing), DIN EN 1630 class RC2 / WK2 (resistivity), DIN EN 50102 - IK10 (shock resistance), Protection class IP 65
Material of the module Zinc die
Surface of the module grey powder-coated RAL 7038
Fixing of dish Screw-on cap IP 65
Handle type Swinghandle
Key removable Key can be withdrawn in any handle position
Swinghandle height in front of door 34 mm
Swinghandle length 165 mm
Suitable for door thicknesses up to 6.00mm
Suitable for door thickness from 1.50mm
Product type Swinghandle, Lifthandle
Matching Products

Matching Products

  • All matching products

  • Cam

    Cam

  • Profile half cylinder

    Profile half cylinder

  • Rod control

    Rod control

  • Assembly

    Assembly

  • Keys

    Keys

Download
Login
Contact

Support at a glance

We are happy to help you!

Do you have any questions or do you need further information?

Please contact the relevant sales force of the responsible subsidiary or use our callback service!