Skip to main content
Header Main Image

Locks

Got it on lock

The swinghandle product family Agent E by EMKA Electronics has been specially developed for the use on server racks and enables central monitoring, remote-controlled opening and system configuration. The authentication is performed directly on the handle either by the RFID cards available in the company or via the individual fingerprint. The Agent E is both available as a wired and a wireless version for centrally administered server racks as well as for single cabinets in stand-alone operation.

EMKA Piktogramm Locks

Swinghandle Agent E Wireless

The Agent E Wireless is as yet the only swinghandle based on wireless communication. Due to its wireless and thus cost-saving mounting it is most suitable for retrofitting in data centres. The authentication is performed by RFID or fingerprint. Highly-efficient power management guarantees a long battery life.

Product features

  • Wireless communication via wireless network 868 MHz (industry standard)
  • Control of up to 1,200 doors in a wireless network via access units and control unit
  • Authentication via 125 kHz or 13,56 MHz transponder cards or via fingerprint. Remote-controlled opening is also always possible
  • All handles excel at extremely energy-efficient battery operation (service life battery min. 3 years) and have one port for one door contact
  • Emergency power function or emergency opening via integrated USB port

More information

Swinghandle Agent E Wired

The Agent E Wired is the wired version of the electromechanical swinghandle range. It enables a central and complete logging of events. The personified access is realised securely and conveniently via RFID card reader and fingerprint.

Product features

  • Wired communication via CAN bus by Access Units and Control Unit
  • Authentication via 125 kHz or 13,56 MHz transponder cards or via fingerprint. Remote-controlled opening is also always possible
  • Handle type Wired Slave does not have its own authentication and is unlocked in combination with master handle, central keyboard / central card reader or by remote-controlled opening. The opening is effected by touching the sensor field
  • All handles have one port for one door contact
  • In combination with the Access Unit, the middle LED in the sensor field can be activated to signal possible malfunctions in the rack such as increased temperature (does not apply to the type fingerprint)
  • Emergency opening by integrated USB port
  • One Control Unit can control up to 64 handles

More information

Swinghandle Agent E Stand Alone

The swinghandle Agent E Stand Alone consists of a battery-driven handle with integrated card reader for 125 kHz or 13.56 MHz transponder cards. Via the integrated USB interface in combination with the software Control Cockpit you can programme cards , delete them, create time profiles or read out the integrated data storage. This handle does not require any external wiring for functioning. The stand-alone system is a low-cost locking system for applications where no data networking and no remote-controlled monitoring are required. Keypad and handles are available as individual components and as a constructive unit.

Product features

  • Configuration via USB port with Agent E configuration software (programming, deleting cards or fingers, creating authorisation and time profiles, reading out event logs)
  • Authentication via 125 kHz or 13.56 MHz transponder cards or via fingerprint.
  • All handles excel at extremely energy-efficient battery operation (service life battery min. 3 years) and have one port for one door contact
  • Emergency power function or emergency opening via integrated USB port.

More information

Swinghandle 1150 with electromechanical release and emergency opening

This handle is suitable for locking cabinets indoors. The release is eff ected by applying a voltage signal of 12 V or 24 V DC. After pushing the handle down into the dish briefly, it can be open

Features

  • Integrated LED for signalling a released handle
  • Potential-free reed contact for remote monitoring of handle state
  • Emergency opening with key possible in case of power failure
  • Dust cap will be destroyed in case of an emergency opening and needs to be replaced
  • Connection option to Locking Unit 3000-U32-x or Access Unit 3000-U47-x connector plug optional

More information

Single point locking with emergency opening

The single point locking is used in special fi elds of application as a lock which is invisible from the outside.

The following types are available

  • “Basic” = locking is opened by switching on the power supply and locked as soon as the door is closed again
  • “Basic delayed Re-Lock” = locking is opened by switching on the power supply and remains in the position “open” as long as the power supply is applied
  • “Energy store” = locking opens when switching off of the power supply (alternative to magnetic locks)

Features

  • Big supply voltage range from 9 ... 32 V
  • Potential-free switch for remote monitoring of the handle state
  • Emergency opening possible with Bowden cable in case of power failure
  • Connection possible to Locking Unit 3000-U32-x or Access Unit 3000-U47-x; adapter cable optional

More information

Swinghandle 1317 with WK2; mechanical or electromechanical release

Standards 

  • Test according to WK2 DIN V ENV 1630
  • Rating IK 10 following DIN EN 50102
  • Integrated scratch resistant surface prevents damage (handle / escutcheon)

Features

  • Zinc-die type fulfills the requirements of resistance level RC2 (protection against vandalism) according to DIN V ENV 1630
  • Great flexibility regarding cost / benefit due to the big variety of types
  • Tested and approved by Deutsche Telekom

More information

Swinghandle 1154 with electromechanical release and emergency opening

This handle is suitable for locking outdoor cabinets. By applying a 12 V, 24 V or 48 V DC signal, the handle can be released. After pushing the handle briefly into the dish, it can be opened.
The integrated reed contact serves as remote control of the handle status. For locking the handle has to be pushed into the dish until the lock mechanism latches. The supplied key is used for opening the handle in case of power failure. To open the cylinder cover the screw M3 has to be removed. Then it is possible to unlock by means of round / pin cylinder.

More information