Skip to main content
Header Main Image

Quarter turn for quick mounting

Program 1000

Specifications

Further information/CAD

Article information

This page contains articles by following specifications

Chiusure 1/4 di giro, chiusure 1/4 di giro a compressione, chiusure per climatizzazione

Chiusure ¼ di giro

The quarter turn for quick assembly can be clipped in within a few seconds.

Product features at a glance:

  • Standard cut out 1000
  • Insert part: zamac
  • Three standard height dimensions (H) for Polyamide snap-in pins H=18, H=22 and H=24, each for four different door thickness ranges
  • Further versions of snap-in pins with regard to the height dimension on request
  • Cost saving by tool-less assembly within seconds
  • Groundprinciple of this patented solution:
    the higher the closing force, the greater the tightness
  • Snap-in pin with safety cap for better insolation of the insert
  • High IP-protection (IP 69K)
  • High safeguarding against overwinding
  • Patented

 Assembly note:

Assembly door stop on the right:
Pre-assembled insert unit is inserted into the cutout while the insert is closed. Then it is fixed by the snap-in cam.

Assembly door stop on the left:
Pre-assembled insert unit is inserted into the cutout while the insert is closed. Then it is fixed by the snap-in cam.

Art.-Nr. Article Weight Trading unit PU Ex stock STEP IGES
1000-590 Snap-in cam, H=18, Ts=1.0 - 1.5 1 1 X 1000-590 1000-590
1000-591 Snap-in cam, H=18, Ts=1.5 - 2.0 1 1 X 1000-591 1000-591
1000-592 Snap-in cam, H=18, Ts=2.0 - 2.5 1 1 X 1000-592 1000-592
1000-593 Snap-in cam, H=18, Ts=2.5 - 3.0 1 1 X 1000-593 1000-593
1000-594 Snap-in cam, H=22, Ts=1.0 - 1.5 1 1 X
1000-595 Snap-in cam, H=22, Ts=1.5 - 2.0 1 1 X 1000-595 1000-595
1000-597 Snap-in cam, H=22, Ts=2.5 - 3.0 1 1 X 1000-597 1000-597
1000-598 Snap-in cam, H=24, Ts=1.0 - 1.5 1 1 X 1000-598 1000-598
1000-599 Snap-in cam, H=24, Ts=1.5 - 2.0 1 1 X 1000-599 1000-599
1000-600 Snap-in cam, H=24, Ts=2.0 - 2.5 1 1 X 1000-600 1000-600
1000-601 Snap-in cam, H=24, Ts=2.5 - 3.0 1 1 X 1000-601 1000-601
1000-602 Snap-in cam, H=22, Ts=2.0 - 2.5 1 1 X 1000-602 1000-602
1000-603 Safety cap for snap-in cam 1 1 X 1000-603 1000-603
1000-U902 Insert unit square 7 1 1 X 1000-U902 1000-U902
1000-U903 Insert unit square 8 1 1 X 1000-U903 1000-U903
1000-U904 Insert unit triangular 8 1 1 X 1000-U904 1000-U904
1000-U905 Insert unit double bit 3 1 1 X 1000-U905 1000-U905
1000-U907 Insert unit slot 2 x 4 1 1 X 1000-U907 1000-U907
1000-U908 Insert unit square 8mm with M6 thread for wing knob 1 1 X 1000-U908 1000-U908