Swinghandle 1154 with electromechanical release and emergency opening
Specifications
Further information/CAD
This page contains articles by following specifications
Swinghandles, Lifthandles and Escutcheons
- Design
- Locking component
- Installation circumstances
- Locking device
- Number of locking devices
- Material Handle
- IP protection according to IEC 60529
- Article with foamed seal
- Program
Rack Management Systems
This handle is suitable for locking outdoor cabinets. By applying a 12 V, 24 V or 48 V DC Signal, the handle can be released. After pushing the handle briefly into the dish, it can be opened. The integrated reed contact serves as remote control of the handle Status. For locking the handle has to be pushed into the dish until the lock mechanism latches. The supplied key is used for opening the handle in case of power failure. To open the cylinder cover the screw M3 has to be removed. Then it is possible to unlock by means of round / pin cylinder.
Art.-Nr. | Article | Weight | Trading unit | PU | Ex stock | STEP | IGES |
---|---|---|---|---|---|---|---|
1154-U6 | Swinghandle | 0,0099 kg | 2000 | 1 | 1154-U6 | 1154-U6 | |
1154-U6-01 | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-01V | Swinghandle | 0,99 kg | 2000 | 1 | 1154-U6-01V | 1154-U6-01V | |
1154-U6-02 | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-02V | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-03 | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-03V | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-04 | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-04V | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-05 | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-05V | Swinghandle | 0,99 kg | 2000 | 1 | |||
1154-U6-V | Swinghandle | 0,001 kg | 100 | 1 | 1154-U6-V | 1154-U6-V |