New: No tools required to install the 125° clip-in hinge into the door

The internal hinge, invisible from the outside, can be mounted on either the left- or right-hand side of the frame. The door section assembly is positioned on the plastic sliding discs of the frame section to attach the surface-mounted door or flap. Subsequently, the door section assembly is simply pushed horizontally in the direction of the hinge pin until the door is in position. A clicking sound confirms the proper installation. This clipping function distinguishes the new hinge from conventional hinges, because the hinge pin is permanently installed in the frame section and therefore does not need to be moved up or down. The guide automatically moves the assembly into the correct position. Applying slight pressure to the door causes the hinges to lock, firmly connecting the door to the frame.

No tools are required for this, nor does the door need to be locked. A secure connection between the door section and the frame is created as soon as the open door is pressed down. The door or flap can be removed again just as easily. To do this, the latch on the door section assembly is pulled to unlock the door section. In this open position, the latch does not need to be held down because it engages in this position. The other hinges can now be opened one after the other in the same way. The door or flap can then be removed quickly and easily. The new 125° clip-in hinge is shock and vibration tested in accordance with DIN EN 61373 Cat. 1B and has been successfully tested in continuous operation.