Skip to main content
Header Main Image

Quarter turn for quick mounting

Program 1000

Specifications

Further information/CAD

Article information

This page contains articles by following specifications

Quarter turns, Compression latches, Heavy duty latches for big door gauges

转舌锁

The quarter turn for quick assembly can be clipped in within a few seconds.

Product features at a glance:

  • Standard cut out 1000
  • Insert part: zamac
  • Three standard height dimensions (H) for Polyamide snap-in pins H=18, H=22 and H=24, each for four different door thickness ranges
  • Further versions of snap-in pins with regard to the height dimension on request
  • Cost saving by tool-less assembly within seconds
  • Groundprinciple of this patented solution:
    the higher the closing force, the greater the tightness
  • Snap-in pin with safety cap for better insolation of the insert
  • High IP-protection (IP 69K)
  • High safeguarding against overwinding
  • Patented

 Assembly note:

Assembly door stop on the right:
Pre-assembled insert unit is inserted into the cutout while the insert is closed. Then it is fixed by the snap-in cam.

Assembly door stop on the left:
Pre-assembled insert unit is inserted into the cutout while the insert is closed. Then it is fixed by the snap-in cam.

Art.-Nr. Article Weight Trading unit PU Ex stock STEP IGES
1000-590 Snap-in cam, H=18, Ts=1.0 - 1.5 1 1 X 1000-590 1000-590
1000-591 Snap-in cam, H=18, Ts=1.5 - 2.0 1 1 X 1000-591 1000-591
1000-592 Snap-in cam, H=18, Ts=2.0 - 2.5 1 1 X 1000-592 1000-592
1000-593 Snap-in cam, H=18, Ts=2.5 - 3.0 1 1 X 1000-593 1000-593
1000-594 Snap-in cam, H=22, Ts=1.0 - 1.5 1 1 X
1000-595 Snap-in cam, H=22, Ts=1.5 - 2.0 1 1 X 1000-595 1000-595
1000-597 Snap-in cam, H=22, Ts=2.5 - 3.0 1 1 X 1000-597 1000-597
1000-598 Snap-in cam, H=24, Ts=1.0 - 1.5 1 1 X 1000-598 1000-598
1000-599 Snap-in cam, H=24, Ts=1.5 - 2.0 1 1 X 1000-599 1000-599
1000-600 Snap-in cam, H=24, Ts=2.0 - 2.5 1 1 X 1000-600 1000-600
1000-601 Snap-in cam, H=24, Ts=2.5 - 3.0 1 1 X 1000-601 1000-601
1000-602 Snap-in cam, H=22, Ts=2.0 - 2.5 1 1 X 1000-602 1000-602
1000-603 Safety cap for snap-in cam 1 1 X 1000-603 1000-603
1000-U902 Insert unit square 7 1 1 X 1000-U902 1000-U902
1000-U903 Insert unit square 8 1 1 X 1000-U903 1000-U903
1000-U904 Insert unit triangular 8 1 1 X 1000-U904 1000-U904
1000-U905 Insert unit double bit 3 1 1 X 1000-U905 1000-U905
1000-U907 Insert unit slot 2 x 4 1 1 X 1000-U907 1000-U907
1000-U908 Insert unit square 8mm with M6 thread for wing knob 1 1 X 1000-U908 1000-U908